Sidekick Pro-Hub XL- Designed for your personal stance and to replicate your stance every throw. Repetitive consistency will develop consistent accuracy. Designed for all ages and all levels from beginner to Pro with a stance width of 800mm or less.
 
The Sidekick Pro-Hub is simple to assemble.
 
1. Choose your preferred method of fixing the base plate, either to the floor, an existing upstand or firmly and evenly stick the 1mm neoprene strips to the underside of the base plate ensuring no air bubbles are present.
2. Install your accuracy measurement sticker to the tops side of the base plate oche, ensuring it is straight and firmly and evenly stuck down and with no air bubbles.
3. Take your normal stance and place the guides in position to see which holes will best suit the magnets for maximum contact. 2 holes per guide.
4. Place the magnet holders into these holes and then put the magnets into the holders from the underside. I see screw and tighten. This will pull the magnet into the holder and tighten the holder into the hole.
5. Turn the guides over and install the rubber pads either side of the magnet holders and holes. Pressing firmly to ensure a good hold.
6. Place the Pro-Hub in the required position and take your stance.
7. Place toe alignment guide across the tips of your toes.
8. Place the angle guide alongside you lead foot, either inside or outside of foot.
9. Throw your darts and adjust accordingly.